Custom in-ground concrete pool in a landscaped backyard

In-Ground Concrete Pools in Brisbane

In-Ground Concrete Pools, Poured to Fit the Block You Have

Designed, engineered and built by one family team from our Caboolture workshop. Start with the page for your suburb, or book a site visit.

Boomerang Pools designs and builds custom in-ground concrete pools from its workshop at 1 Harrow Court, Caboolture. A poured shell is shaped to your land rather than chosen from a mould, so the pool can work around a mature tree, step down a slope or fit a tight estate yard. The same family team handles the design, the approval paperwork, the shell, the interior and the fencing, then hands over a certified pool. Pick your suburb below, or book a site visit and we will read your block in person.

This is Boomerang Pools' in-ground concrete pool page for Brisbane's north and the City of Moreton Bay. Below it sit six suburb pages, each written for the kind of block that suburb actually has rather than with a name swapped in: Caboolture, where older homes sit on bigger blocks with mature trees; Morayfield, with its estate-sized backyards; Burpengary, where an established town centre meets newer estate lots; Bellmere, where lots are large enough to plan around septic systems and sheds; Elimbah, on acreage beside bushland; and Wamuran, where the land rises into the foothills.

All six are in the City of Moreton Bay and are served from the Caboolture workshop. This page covers what those pages have in common: what decides an in-ground pool design, where these builds go wrong, and what you can check about any pool builder before you sign.

Local knowledge

Why it matters here

The first thing that shapes a concrete pool is the ground under it. Much of the region sits on reactive clay that swells in the wet season and shrinks through winter, while other blocks are sandy and free-draining and give a shell less support from the side. A poured shell is engineered for the soil that is actually found on the block, which is why the soil is looked at before a price is given.

The second is the shape of the yard. An estate lot leaves less open ground and often only a narrow side path for machinery. An older block has trees, a shed or a carport that has to be worked around. An acreage block may carry a septic system, a dam or a bushland edge that decides where the pool can go. A sloping site needs the shell raised or stepped rather than dropped in.

The third is safety and approval. Queensland's pool safety rules set the height and gaps of the barrier, and a new pool needs building approval, a final inspection and a certificate before it is used. Planning for those at the design stage is what stops a finished pool waiting on a fence redesign. None of this can be settled from a suburb name. It is settled at the block, which is why every quote starts with a site visit.

On the ground here

Common local challenges

The challenge

Reactive clay that moves with the seasons

Much of the higher ground around Caboolture and Morayfield is reactive clay, which expands in the wet summer and contracts through the dry winter.

A shell and surrounds that are not designed for that movement can crack, and the repair costs more than getting the engineering right the first time.

We check the soil before pricing and specify the reinforcement and shell for the ground we actually find, instead of quoting off a satellite image. Reactive soils are the reason a poured shell suits this region so well.

The challenge

Tight estate yards and narrow side access

Newer estates in Morayfield and Burpengary East were built on smaller, planned lots, and older homes often have a carport or shed narrowing the side of the house.

If an excavator cannot reach the yard, the job stalls, a fence comes down unplanned, or the pool ends up smaller than it needed to be.

We measure the tightest point before quoting and use smaller machines where a standard excavator will not fit. Compact poured pools, often 3 to 6 metres, can be shaped to your setbacks rather than a catalogue.

The challenge

Sloping blocks and a fall across the yard

Wamuran's land rises and rolls into the D'Aguilar Range foothills, and on some estate lots the house sits well above the lawn.

Dropping a pool into a slope leaves a wall of retaining and stairs, and poorly drained ground can slump against the pool wall after heavy rain.

We raise the shell to deck height or step it down the fall, with retaining, subsurface drainage and properly compacted backfill so the ground around the pool stays stable.

The challenge

Septic systems and sheds on larger lots

Bellmere lots commonly run to a hectare or more and carry a mix of house, shed, dam and paddock, often with an on-site wastewater system.

A pool placed without regard to the septic tank, treatment system or disposal area can breach setback distances or block future servicing access.

We survey the wastewater system before design and apply the required setbacks, so the pool, the equipment and the servicing access do not conflict.

The challenge

Bushland edges and bushfire overlays

Elimbah blocks often border timbered land or bushland reserve in the shadow of the Beerburrum State Forest.

Bushfire-prone area overlays can carry setback or defendable-space requirements that change where the pool, pump shed and fence can sit.

We check the overlays before finalising the pool's position and work the pump shed and fencing into the plan, so the design does not have to be redrawn later.

The challenge

Fencing and certification left until the end

The barrier is often treated as something to add after the pool is finished.

Queensland pool fences must be at least 1200mm high from finished ground, with no more than a 100mm gap underneath, and a sloping site must meet that height at every point. A pool cannot be certified until the barrier complies.

We plan gate swings and fence lines at design stage and install compliant fencing and handrails as part of the build, then see the pool through to final certification.

Our services

What we offer

Custom In-Ground Concrete Pool Construction

The full build: site survey, engineering, excavation, steel, sprayed shell, interior and surrounds. Suited to blocks where levels, mature trees or an existing shed rule out a fixed mould.

The Caboolture page covers older, bigger backyards and reactive clay.

In-ground pools in Caboolture

Plunge & Small-Space Pools

Compact poured shells for estate yards, sometimes L-shaped or wrapped around a corner. The dimensions come from your setbacks, not a mould catalogue.

The Morayfield page covers estate-sized backyards and tight side access.

In-ground pools in Morayfield

Raised & Split-Level Shells

Where a yard falls away, the shell is raised to deck height or stepped down the fall, with retaining and drainage built around it.

The Wamuran page covers sloping acreage in the range foothills.

In-ground pools in Wamuran

Pool Interiors, Coping & Tiling

Pebble and quartz finishes or ceramic and glass tile, waterline tiling, coping and feature mosaics, chosen against your paving and house.

Tiling is also available as its own service across the region.

Pool tiles

Pool Fencing & Stainless Handrails

Compliant barriers and handrails installed as part of the build, with gate swings and fence lines planned at design stage.

Fencing is also available on its own for existing pools.

Pool fencing

Pool Renovations & Resurfacing

Resurfacing, new coping and tiling, upgraded filtration and compliant fencing for an older pool that is structurally sound but tired.

Many Caboolture pools date from the 1980s and 90s and suit a renovation.

Pool renovations
Our story

The family behind the crew

Start with what you can check. The Queensland Building and Construction Commission advises getting written quotes from several pool builders who have inspected your site, and checking each builder's licence and licence history before you sign. Ask us for our QBCC licence number and look it up on the QBCC register yourself.

Boomerang Pools is a family-owned business that states it has been designing and constructing in-ground concrete pools and spas for over 30 years. It works from one address, 1 Harrow Court, Caboolture. The people who quote your pool are the people who set the steel, spray the shell and tile the waterline, so a decision on site does not wait on a chain of sub-contractors.

Renovation options

Options & pricing

Good to know

Frequently asked questions

Where do you build in-ground concrete pools?

We build from our workshop at 1 Harrow Court, Caboolture. The six suburb pages on this page cover Caboolture, Morayfield, Burpengary, Bellmere, Elimbah and Wamuran in the City of Moreton Bay in local detail, but they are not the limit of where we work. Book a site visit with your address and we will tell you straight away whether we can take the job.

Who arranges the building approval?

In Queensland a pool needs building approval from your local council or a private certifier before work starts, and the QBCC notes that in most cases the pool builder arranges it. We prepare and lodge the approval paperwork, build to the approved plans and see the pool through to final inspection and certification. If the site is difficult or a pool would sit over a sewer line, the certifier may ask for extra reports or approvals, and we will tell you at the quote.

What pool fence does a new pool need?

The barrier must be at least 1200mm high measured from finished ground level, with a gap of no more than 100mm at the bottom, and on a sloping or stepped site it must be 1200mm high at every point. Gates, latches and non-climbable zones have their own rules too. We design the fence with the pool so certification is not held up at the end.

What should a pool quote include?

The QBCC suggests your quote covers the shape, size and depth, where the pool sits on the block, the interior lining, the filtration equipment, accessories such as lights and handrails, and whether fencing, surrounds and landscaping are included. Domestic building work of this kind also needs a written contract with a cooling-off period. We quote in writing after seeing the block, so the price reflects your yard.

Why choose a poured concrete pool over a fixed shell?

Because a poured shell is designed for your ground and your yard rather than a standard mould. It can be engineered for reactive clay or sandy soil, shaped around a tree or a narrow setback, and raised or stepped on a slope. That flexibility is the reason we build in concrete, and it asks for more patience on site while the shell cures.

How long does an in-ground concrete pool take to build?

Typically a few weeks to a couple of months from excavation to handover, depending on the size, the access, the finishes you choose and the weather. Summer storms can pause excavation and pouring, so we build a realistic weather allowance into the program.

Do you use sub-contractors?

No. Boomerang Pools is family owned, and one team takes the job from design through to handover, including the shell, the interior, the tiling and the fencing. Ask us who will be on site when you book the quote.

Get in touch

Tell us where the block is and what you want the pool to do: laps, a cool-off plunge, a spa, or a centrepiece for the back deck. We will come and look at the soil, the fall, the access and anything already in the yard, then give you a written quote. Call 07 5495 7355, email pools@boomerangpools.com.au, or request a free quote online.

We are a family owned and operated pool construction business that takes pride in delivering the finest quality concrete pools in and around the Moreton Bay region.
QBCC Licence No. 1057362

Contact info

Social

Copyright © Boomerang Pools PTY LTD. Website Design by Smart Local